Projector Mounts -- LCD/DLP/CRT: 230V Electric Lift for Projectors

The SL-EU SMART-LIFT™ assures a pleasing installation for homes and corporate offices by its exceptionally smooth and quiet movement. Designed to fit most installation requirements, the SL-EU needs only eleven inches of ceiling clearance and is plenum rated. We understand the complexity of lift installations and have a helpful technical staff available to assist with questions. -------------------------------------------------------------------------------- FEATURES COMMON TO SLEU SERIES Plenum rated Low profile – 11" (280 mm) overall closed height 8 1/4" (20.95 cm) of travel distance Used with finished or suspended ceiling Projector Roll, Pitch and Yaw Fore/aft, left/right projector positioning Vertical projector cradle adjustment Quick projector disconnect/reconnect Three mounting methods SPECIFICATIONS COMMON TO SLEU SERIES Downward Travel: 8.25 inches 209.55 mm Minimum Clearance Above Ceiling : 11 inches 279.4 mm Overall Dimension (Up Position - HxWxD): 11" x 22 1.8" x 26 1.8" 279.4mm x 562mm x 664mm Maximum Projector Size (HxWxL): 9.5 x 18 x 22.5 inches 241.3 mm x 457.2 mm x 571.5 mm Ceiling Closure Panel (WxD): 19 5.8" x 23 3/8" 498.6mm x 593.8mm Ceiling Opening (WxD): 22" x 25 3.4" (+3/8", -0") 558.8mm x 654.1mm Voltage: 230V Current Draw: 0.8 Amps continuous Net Weight: 66 lbs. 29.7 kg Lift Capacity: 35 lbs. 15.9 kg Projector Adjustment Features: Roll ± 2 degrees Pitch ± 12 degrees Yaw ± 5 degrees Horizontal and vertical cradle positioning Color: White Three Mounting Methods: 1. Three 3/8" Threaded Rods. Three point mounting for easier leveling. 2. 1 1/2" Extension Column with SMA-600. Provides 1 1/2" horizontal adjustment. 3. Side mounting using the built in joist tabs. Allows installation directly into wood framed ceilings. FAQs COMMON TO SLEU SERIES Q. Is the SL-EU plenum rated? A. Yes. The SL-EU is in compliance with the National Electrical Code requirements outlined in NEC Article 300.22 C when installed in accordance with Chief’s instructions for plenum rated installations. Q. How do I mount my projector to the lift? A. One SLB bracket is required to attach it to the lift. The SLB bracket is a separate part number and is used only for Chief lifts. You order the same suffix as the RPA but use an SLB prefix. Q. Can the SL-EU be used for tabletop installations A. Yes. The SL-EU can be installed upside down to conceal projectors in tables or cabinets. Verify that the total weight that will be lifted does not exceed 35 lbs./15. 9 kg. Q. Does the SL-EU fit inside a 2' x 2' suspended ceiling? A. The SL-EU is slightly larger than the 2' x 2' ceiling tile opening. Some modification of the ceiling track will be necessary to install the lift. ORDERING STEPS COMMON TO SLEU SERIES 1. Determine if 8 1/4" of travel is appropriate for your application. 2. Verify you have a minimum 11" (280 mm) of ceiling clearance. 3. Cross-reference the manufacturer and model number by clicking on the Cross- Reference link above, and then order an SLB bracket. 4. Verify that the dimensions of the projector fit into the Maximum Projector Size dimension listed in the Specifications. If your projector is close to the maximum size, call Customer Service to verify that your projector will fit properly. 5. Determine which accessories you will need for your installation. Choose from the Recommended Accessories

SLEU-1

| T:020 8908 3111 |F:020 8908 3110| http://www.hypexuk.com | 20 Osram Road, East Lane Business Park, Wembley, HA9 7NG, United Kingdom |